Dip progression: from a support hold to strict dips, with the number for each step

The dip exercise starts with a 30 s support hold on parallel bars. Then slow negatives: lower for 3 s or more until your upper arms are parallel to the bars, up to 3 x 8. Then full dips: 1 rep, then 5, then 10 strict reps, the number that opens straight-bar dips and the muscle-up line.

General information, not medical advice. Stop if you feel dizzy or unwell, and ask a professional about any health concern.

The dip chain in three numbers

Most people fail their first dip because they start with the dip. Start with the top position, then the way down, then the way up. Each step has a number that tells you to move on.

You need parallel bars, a dip station, or two sturdy chairs at shoulder width that cannot slide. If you already hold a support for 30 seconds, skip to the negatives.

Step 1: support hold, 30 seconds

Step up to straight arms between the bars. Use a step if the bars are high, so you never jump and slip between them.

  1. Push the bars down. Shoulders away from your ears.
  2. Lock the elbows, chest open.
  3. Slight hollow body, legs together under or a little in front of the hips.
  4. Breathe and hold.

The hold ends when your shoulders creep up or your elbows bend. That is the stopwatch rule.

Dose: 3 holds of 10 to 30 seconds, 1 minute rest, 3 times a week. Can't lock out yet? Rest your toes on a box for 3 x 20 s, or hold with the bars against your thighs and hands in front.

Move on when

30 seconds on all 3 holds. Keep building toward 60 s, level 3, in the warm-up while you move on.

Step 2: dip negatives, 3 x 8

From the locked support, lower yourself slowly to the bottom, then put your feet down and step back to the top. Do not press up yet.

  • Lower in 3 seconds or more. Up to about 8 seconds is a good target.
  • Lean slightly forward, elbows tracking back.
  • Stop when your upper arm is parallel to the bars.
  • Feet down, reset, repeat. No bounce out of the bottom.

Dose: two or three sessions a week, 3 sets of 5 growing to 8 negatives, 2 minutes between sets. Cap negatives at about 10 per session. Negatives make you sorer than normal reps, so start at the low end.

Tired of negatives but not ready? A jump dip sits between: start at the bottom with your feet on a box, jump and press together, then lower slowly. Use the smallest jump that gets you to lockout.

Move on when

3 x 8 slow negatives, each one 3 seconds or more, controlled to parallel.

Step 3: the strict dip, 1 then 5 then 10

From a locked support, lean slightly forward and lower until your upper arm is parallel to the bars. Forearms stay as close to vertical as you can. Press back to straight arms.

A rep counts when it starts and ends with straight elbows and shoulders down, reaches parallel or lower, and has no kick or swing.

Dose: three sets, starting wherever you are and adding one rep to each set every session, 2 minutes between sets, 2 or 3 days a week. Once you have 3 x 5 strict, add a 1 to 2 second pause at the bottom of each rep. The pause removes the bounce and builds the bottom position.

Dip countWhat it means
10 strict repsLevel 3: straight-bar dip and the muscle-up line open
15 good repsStrong base for a first muscle-up
About 20 repsReady for weighted dips

Ten is enough to start the straight-bar dip and the muscle-up line, and you keep adding reps while you train them.

Depth, lean and dips for chest

Depth. Upper arm parallel to the bars, elbow at about 90 degrees. Deeper is allowed only while your shoulders stay pressed down.

Lean. Your lean decides which muscles work. Upright with elbows behind the hands loads the triceps more, a forward lean loads the chest and shoulders more. For dips for chest, keep a clear forward lean and full depth. For triceps, stay taller.

Grip. Bars about shoulder width. Very wide bars stretch the chest more and are less stable for beginners.

Shoulder safety, in one rule

Deep dips load the front of the shoulder and the collarbone joint. Keep the shoulders pressed down, lean slightly forward, and stop at the depth you control without pain. The slight lean protects the shoulders. If a dip pinches, cut the depth today and get it looked at if it keeps coming back.

Five mistakes to fix today

  • Half reps. Reach parallel every rep. Count only those.
  • Swinging legs. Keep the body rigid and the legs still.
  • Shoulders rolling up at the bottom. Cut the depth until you can keep them down.
  • Bouncing on a heavy band. Use a lighter band and a 1 second pause.
  • Dropping fast on negatives. Constant tempo, feet ready to help.

What 10 dips open

Straight-bar dip. Hands on one bar in front of you, chest leaning over it, legs forward as a counterweight. It is the top half of the bar muscle-up. Levels 1, 5, 8.

Ring dip. First own a 30 s ring support with the rings by your hips, then ring negatives, then ring dips to shoulders below the elbows. Keep the rings close to your body the whole time.

Pair the dip line with your pulling: our page on pull-ups for a muscle-up has the other half of the numbers. And if push-ups are still under 10, build those first with our push-up guide.

Questions people ask

How many dips should I be able to do?

Ten strict dips is level 3, the number that opens the straight-bar dip. For the muscle-up, 15 good dips makes the transition feel much easier, and about 20 is a solid base before weighted dips. Ten clean beats twenty half reps.

How deep should a dip go?

Lower until your upper arm is parallel to the bars, which puts the elbow at about 90 degrees or a little past. Go only as deep as you can control with your shoulders pressed down.

Do dips work the chest?

Yes. Leaning forward shifts more of the work to the chest and front shoulders; staying upright shifts it to the triceps. For dips for chest, keep a clear forward lean, elbows tracking back, and full depth.

Are dips bad for your shoulders?

Deep dips load the front of the shoulder. Keep the shoulders pressed down, lean slightly forward, and stop at the depth you control without pain. If you have had shoulder trouble before, start with shallow dips or push-ups and build depth slowly.

Made by EASYTECH, who also make Calisthenics.