Calisthenics back workout: three pull sessions, from the dead hang to the front lever

A calisthenics back workout combines a vertical pull, a horizontal row and a hang or lever hold. Beginners: dead hangs, negatives or jump pull-ups, and rows, 3 sets each. Intermediate: pull-ups at 3 to 4 sets of 4 to 8, plus rows. Advanced: archer or weighted pull-ups and tuck front lever holds.

General information, not medical advice. Stop if you feel dizzy or unwell, and ask a professional about any health concern.

The Pull region in one look

Our skill map has 155 pulling skills. They split into four families:

  • Bent-arm pulls (62 skills): rows, pull-ups, explosive pulls, the muscle-up line, one-arm work.
  • Straight-arm pulls (59 skills): front lever, back lever, human flag, iron cross.
  • Bar and rings dynamics (26 skills): swings, kips, freestyle.
  • Hangs and grip (8 skills): dead hang, active hang, scapular pull and the rest.

A back workout pulls from the first two families. Every session below has the same three slots: a vertical pull (bar overhead), a horizontal pull (a row toward the chest), and a hang or a lever hold. Then a hanging core move to finish.

Why both directions? The lats are the most active muscle in both pull-ups and chin-ups, but the biceps and chest worked more in the chin-up and the lower trapezius more in the pull-up. Different angles load the back differently. Rows add the horizontal line.

The ladders: where each pull sits

Vertical pulls, easiest first:

  • Dead hang of 20 s opens scapular pulls and jump pull-ups.
  • Scapular pulls for about 10 reps and a 20-second chin-up top hold open the negative pull-up.
  • Negatives for 3 x 8 controlled lowerings open the pull-up and the chin-up.
  • 8 to 10 pull-ups open the chest-to-bar pull-up. 10 strict reps open the weighted pull-up.
  • 3 to 5 chest-to-bar reps open the archer pull-up.
  • About 10 clean pull-ups is the rule of thumb before muscle-up work, once explosive pull-ups and straight-bar dips are in place.

Horizontal pulls, easiest first: vertical row, incline row, row, wide row, archer row, one-arm row. Each step moves on at the top of its range: 3 x 15 for the vertical and incline rows, about 8 clean reps for the row and the wide row. The full row ladder is in the Australian pull-up guide.

Straight-arm pulls: German hang and skin the cat first, then the tuck front lever and tuck back lever. The tuck front lever asks for about 5 clean pull-ups (10 makes it easier) and 10 rows at a 45-degree incline. It moves on at 15 to 30 seconds. Details in the front lever progression.

The dose behind every set

Three patterns, one per kind of move.

  • Reps (pull-ups, rows): 3 sets of 5 to 8, stopping 1 to 2 reps before failure. Add a rep per set each session. At 3 x 8, move to the next step and restart at 3 x 5.
  • Holds (hangs, levers): each set at about 60% of your best hold, enough sets for 30 to 60 seconds of total hold time, 3 to 6 sets, 90 to 180 seconds of rest. Best tuck lever is 10 seconds? Do 6 sets of 6.
  • Lowerings (when you have 0 or 1 rep): 2 or 3 clusters of 2 or 3 slow lowerings of 3 to 5 seconds, building to 7 to 10 seconds. About 3 minutes of rest. Never more than 10 lowerings in a session.

Move on at 3 x 8. Strength-focused lifters can switch earlier, around 5 or 6 reps, and the app's levels follow the same idea.

Workout 1: beginner back session

About 35 minutes. You need a bar and something to row from: rings hung low, a low bar, or a solid door frame for the vertical row.

SlotOptions, easiest firstSets x repsRest
HangDead hang, active hang3 x 10-30 s60-90 s
Vertical pullScapular pull, jump pull-up, pull-up negative3 x 3-690-120 s
Horizontal pullVertical row, incline row, row3 x 5-1060-120 s
CoreHanging knee raise2-3 x 5-845-60 s

Cues that matter here: on the hang, squeeze the bar and relax everything else. On the scapular pull, keep the elbows locked and move only the shoulder blades. On rows, keep the body straight like a plank and bring the elbows past the ribs.

Move on when

Pull-up negatives at 3 x 8 controlled lowerings, and rows at 3 x 15 on an incline. Then move to workout 2.

Workout 2: intermediate back session

SlotOptions, easiest firstSets x repsRest
Vertical pullChin-up, pull-up, chest-to-bar pull-up3-4 x 4-82-3 min
Horizontal pullRow, wide row, archer row3 x 6-1090-120 s
HangChin-up top hold, L-hang2-3 x 10-20 s60-90 s
CoreHanging leg raise, bent-leg toes to bar3 x 5-1060-90 s

A pull-up counts from straight elbows to chin over the bar and back to straight elbows, with the legs quiet. Stopping short of straight arms at the bottom is the easiest way to cheat yourself. If you are torn between grips, chin-up vs pull-up explains the difference. Body weight matters too: pull-up reps drop as body mass rises. Compare yourself with your own log, not with someone else's number.

Move on when

About 10 strict pull-ups, or 3 to 5 chest-to-bar reps, plus a tuck front lever starting to hold. Then workout 3.

Workout 3: advanced back session

SlotOptions, easiest firstSets x repsRest
Vertical pullArcher pull-up, typewriter pull-up, weighted pull-up3-5 x 3-63-4 min
Lever holdTuck front lever, advanced tuck front lever, tuck back lever3-5 x 5-15 s90-180 s
Horizontal pullArcher row, one-arm row, tuck front lever row3-4 x 4-82-3 min
CoreToes to bar, windshield wiper3 x 5-1060-90 s

Longer rests here are on purpose. A review of rest studies found that trained people need more than 2 minutes between sets to get the most strength out of them, while 60 to 120 seconds is enough for beginners.

On the lever, use the hold pattern: your best tuck front lever sets the dose. Holds under 5 seconds are too short for practice, so stay on the easier version until you own 5.

A word on rings: they are fine for every slot here, but a review found the ring row was the one suspended exercise that did not raise muscle activity over its stable version. Ring or bar, a row is a row.

How a back session fits your week

Train each pull 2 to 3 times a week with a rest day between. A dedicated pull day works, or put the vertical pull and the row into each full-body session. The calisthenics workout plan lays out both. Start with how to do a pull-up if workout 1 is your level, and go to the back lever progression once the tuck back lever holds.

Questions people ask

Can you train your back with calisthenics only?

Yes, as long as you have something to hang from. The Pull region of our map holds 155 skills, from the dead hang to the one-arm pull-up and the front lever. Without a bar or rings, only 2 of them are open, so a bar is the one piece of gear back training needs.

Pull-ups or rows for the back?

Both. A pull-up pulls down from overhead, a row pulls toward the chest. Every one of our sessions has a slot for each. Rows are also the way in for beginners, because the feet stay on the ground and you set the angle.

How many times a week should I train back with calisthenics?

Two to 3 sessions a week per movement, with a rest day between. Three full-body days a week is the classic beginner rhythm. A back session can stand alone or be the pull half of a full-body day.

What if I can't do a single pull-up yet?

Zero is a valid score. Train dead hangs, scapular pulls and rows, then lowerings from the top of the bar. Once you can lower slowly for 3 sets of 8, the first pull-up is the next step on the map. Track rows as your main number until then.

Sources

Made by EASYTECH, who also make Calisthenics.